Teak Restoration can make your furniture appear new. It can be difficult to transport teak furniture from the wild to the store without causing damage to the wood. We often leave it to it weather without any protection or treatments. This can lead to more problems later like warping and cracking from the outdoors. If you’ve spent a good bit of money on your teak furniture but it has not given you many years of reliable service, maybe it is time to get some assistance.

Most people aren’t aware that teak restoration should always be carried out. It is worth spending a lot of money on your patio set. Why not spend some time to maintain it? There are numerous ways to clean your furniture. Some of the things you can do is clean using a water hose using soapy water soap, as well as other chemical-based cleaners, sanding and sealing.

Before you begin anything, make sure you have an oil-free towel or rag to clean your teak furniture. After you have cleaned everything, it’s now time to move forward with the actual restoration. Begin by cleaning out all dust and dirt from your furniture. Then, you can apply the oil teak cleaner to lightly sand your furniture’s surface.

You will require a 2 pack of wood alcohol for the second stage of your Teak Restoration project. Once you have completely covered the piece with alcohol, you will have to sand it to its unfinished wood. The purpose of sanding is to remove any grease or oil you might have left behind during the first phase of the restoration process. To ensure even sanding ensure that you are sanding in a circular manner. After you’ve finished sanding, apply a second layer of wood alcohol and allow it to rest for at least 5 minutes.

Next, we will move on to the next stage of the Teak Restoration process: restoring its patina. This is best done in stages as it is more difficult to complete in one step. This is especially applicable to outdoor furniture sets comprised of grey teak. Each layer will take longer to complete.

The first step is to remove any varnish that could be present on your teak furniture. To remove varnish, you can make use of a stripper or a soft toothbrush. The next step is to thoroughly clean the surface of your teak furniture. Use a soft cloth to get rid of dirt, dust, and hair of pets. It is recommended to use a soft cloth to clean it. Once you have eliminated all dust and dirt and pet hair, you can use a cleaner to remove the rest.

For the next step, you’ll be removing all teak furniture made of sand. Be sure to wear latex gloves while doing this, and only sand using coarse grain sand paper. Apply an oil mixture to the wood after you’ve finished sanding. Apply the oil all over the piece, including knots.

The next step should be simple If you’ve done your job correctly. The patina will begin to lift, and then you will begin sealing and polishing it. That’s all! It’s that easy. If you’re unfamiliar with teak restoration, then you might want to contact an organization that handles this regularly, as they may be able to give you some extra tips and info that you might not otherwise be aware of.

know more about Teak restoration here.